I’ve had to use this quite a few times on laptop repairs cuz the oem used way too much lock-tite. The trick is to use the point at about a 45 angle toward the outside of the head, impacting in the direction it would turn to loosen. Just be careful it doesn’t slip off and cause more damage. The hardened tip can also be used to cut out a wider cut to maybe fit a small flat head in too.
https://www.harborfreight.com/spring-loaded-center-punch-621.html
I’ve had to use this quite a few times on laptop repairs cuz the oem used way too much lock-tite. The trick is to use the point at about a 45 angle toward the outside of the head, impacting in the direction it would turn to loosen. Just be careful it doesn’t slip off and cause more damage. The hardened tip can also be used to cut out a wider cut to maybe fit a small flat head in too.