Stamets@lemmy.dbzer0.comM to The Shitpost Office@lemmy.dbzer0.com · 11 days agoMy cat chewed on it...lemmy.dbzer0.comimagemessage-square40linkfedilinkarrow-up1232arrow-down14
arrow-up1228arrow-down1imageMy cat chewed on it...lemmy.dbzer0.comStamets@lemmy.dbzer0.comM to The Shitpost Office@lemmy.dbzer0.com · 11 days agomessage-square40linkfedilink
minus-squareSchmuppes@lemmy.todaylinkfedilinkarrow-up9·11 days agoI use a scalpel with the non-sharpened side of the blade to scrape the debris to the side and then blast it out with an air compressor. All the things I used before that were not pointy and thin enough to get inside the port.
minus-squareThePantser@sh.itjust.workslinkfedilinkEnglisharrow-up14·11 days agoThe best I found was a plastic tooth flossing pick. Use the pointy side. It’s non conductive to prevent shorting of pins.
I use a scalpel with the non-sharpened side of the blade to scrape the debris to the side and then blast it out with an air compressor. All the things I used before that were not pointy and thin enough to get inside the port.
The best I found was a plastic tooth flossing pick. Use the pointy side. It’s non conductive to prevent shorting of pins.